Description
** THIS IS A PDF PATTERN. YOU WILL RECEIVE A LINK TO DOWNLOAD THE DIGITAL FILES IN YOUR CONFIRMATION EMAIL AFTER PURCHASE**
Did you know we can print out this pattern on A0 paper and post it to you?
- If you would like us to print out this pattern for you, add this pattern to your cart, then click here.
- It will then ask you how many pages your pattern has. This pattern has 2 PAGES.
- This pattern has been drafted for FOUR height ranges: #1 = 154-160cm, #2 = 162-168cm, #3 = 170-176cm, #4 = 178-184cm
- In the comments section, let us know which of the four height ranges you require
- You do not need to upload the pattern file.
For more information about PDF pattern printing check out our PDF Guide.
** PLEASE NOTE: THIS PATTERN HAS BEEN DRAFTED FOR FOUR HEIGHT RANGES, ALL ARE INCLUDED IN THE PURCHASE **
This pattern purchase includes the following files: instructions, A4 print-at-home pattern, A0 copy shop pattern, and plotter pattern for large format printing on a roll.
Jewel is a pair of loose-fitting, straight-cut pants sitting 8 cm (3 1/8") below the natural waistline. The waistband features topstitched belt loops. The front leg is made up of three pieces. The top front features faux side pockets and design lines. The back is designed with a yoke and patch pockets. The pants have a fly front zipper closure. The waistband fastens with a stud button and buttonhole. All the seams feature decorative topstitching. The pants are floor-length.
Suggested Fabric
To sew these pants, choose fabrics with the following properties:
-
medium weight, pliable, breathable, non-stretch or with very little stretch, opaque
-
the fiber content can include natural fibers (cotton) and blends (cotton + viscose, etc.)
-
the following fabrics are recommended: denim, corduroy
Attention! We do not recommend using lightweight, thin fabrics.
For the pocket lining, we recommend using cotton or poplin.
The garment in the photo is made of denim. The fabric is medium weight, pliable and non-stretch. The fiber content is 100% cotton; the fabric weight is 346 g/m2.
The pocket lining is 100% cotton.
Fabric requirements
-
Main fabric
-
Lining fabric
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
-
Lightweight (50 g/m2) knit or woven interfacing
-
One metal pant zipper, 20 cm (7 7/8") long, for all sizes in all heights
-
Bias-cut fusible stay tape, 1 cm (3/8") wide — 0.7 m (3/4 yd)
-
One metal stud button for jeans, 2–2.5 cm (3/4–1") in diameter
-
Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker)
-
Matching (or contrasting) topstitching thread (for example, Madeira No. 35) — 2 spools
Equipment
-
sewing machine for construction
-
overlocker for finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)
-
buttonhole foot for the sewing machine
-
stitch-in-the-ditch foot for the sewing machine (optional)
-
stud button press tool with a set of molds
