Description
** THIS IS A PDF PATTERN. YOU WILL RECEIVE A LINK TO DOWNLOAD THE DIGITAL FILES IN YOUR CONFIRMATION EMAIL AFTER PURCHASE**
Did you know we can print out this pattern on A0 paper and post it to you?
- If you would like us to print out this pattern for you, add this pattern to your cart, then click here.
- It will then ask you how many pages your pattern has. This pattern has 5 PAGES (3 pages of outer coat pattern pieces, 2 pages of lining pattern pieces)
- This pattern has been drafted for FOUR height ranges: #1 = 154-160cm, #2 = 162-168cm, #3 = 170-176cm, #4 = 178-184cm
- In the comments section, let us know which of the four height ranges you require
- You do not need to upload the pattern file.
For more information about PDF pattern printing check out our PDF Guide.
** PLEASE NOTE: THIS PATTERN HAS BEEN DRAFTED FOR FOUR HEIGHT RANGES, ALL ARE INCLUDED IN THE PURCHASE **
This pattern purchase includes the following files: instructions, A4 print-at-home pattern, A0 copy shop pattern, and plotter pattern for large format printing on a roll.
Nurit is a straight, loose-fitting coat, slightly tapered at the bottom, featuring wide horizontal quilting. The coat has front and back princess seams and front inseam pockets. The drop-shoulder sleeves are long and wide. The high standing collar is detachable and is attached with snaps. The coat closes with set-in snaps. Nurit is below-knee length.
Recommended materials
To sew this coat, choose outerwear fabrics with the following properties:
-
medium-weight, soft, without stretch, opaque, wind- and water-resistant
-
the fiber content can include natural fibers (cotton), artificial fibers (viscose, acetate), blends (cotton + polyester, etc.), and synthetics (polyester, polyester + elastane)
-
the following fabrics are recommended: blended raincoat fabrics, dewspo, twill, taffeta, taslan, etc.
Attention! We do not recommend stretchy knit materials or lightweight sheer fabrics (chiffon, organza, stretch lace).
For the lining, choose lining fabrics made from artificial fibers (viscose), blends (viscose + elastane, viscose + polyester), or synthetics (polyester, polyester + elastane).
For the insulation layer, use alpolux, isosoft, thinsulate, polyester batting 100 g/m2 + swan down.
For the interlining, use spunbond 30 g/m2.
The coat in the photos is made from rainwear fabric (51% cotton + 49% polyester). The fabric is medium-weight, soft, wind- and water-resistant. The lining fabric is 45% viscose and 55% polyester. The insulation is alpolux 100 g/m2. The interlining is spunbond 30 g/m2. This material is also known as “agrotex” and can be found in gardening or hardware stores. The coat is interfaced with lightweight knit interfacing, 40-50 g/m2.
Fabric requirements
1. Main fabric
2. Lining fabric
3. Spunbond interlining
4. Alpolux insulation
5. Lightweight knit or woven interfacing
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
6. Swan down filling 700-1000g (approximately the volume and weight of a 50х70см (20x28 in) - 70х70см (28x28 in) pillow).
7. 19 set-in snaps, 1,3cm (1/2") in diameter
8. 2 spools of thread matching the main fabric, 1 spool of thread matching the lining.
Equipment
-
sewing machine for construction
-
walking foot for quilting
-
edgestitch foot for the sewing machine (optional)
-
snap setting tool.
If you don’t have the tools or experience to install the snaps yourself, you can always take your coat to a tailor or a clothing repair shop and have them install the snaps for you.
